Output Bin Command
This command selects the destination bin into which the print job is
output when printed.
?
&
l
#G
Note
The Output Bin command is not recommended. Instead, it is
preferred that the PJL OUTBIN command be used to set the default
media destination.
# =
0
- Automatic selection
1
- Selects bin #1 (printer top/face-down bin)
2
- Selects bin #2 (printer left/face-up bin; this bin not
available when the High Capacity Output (HCO) is
attached)
3
- Selects bin #3 (HCO face up bin)
4
- Selects bin #4 (HCO #1 face down bin)
5
- Selects bin #5 (HCO #2 face down bin)
6
- Selects bin #6 (HCO #3 face down bin)
7
- Selects bin #7 (HCO #4 face down bin)
8
- Selects bin #8 (HCO #5 face down bin)
9
- Selects bin #9 (HCO #6 face down bin)
10
- Selects bin #10 (HCO #7 face down bin)
11
- Selects bin #11 (HCO #8 face down bin)
Default
= 0
Range
= 0 to 11
2-78 Printer-Specific Differences
ENWW