Paper (Media) Source Command
The Paper (Media) Source command selects the specified input
media source. Parameters have been added to enable printing from
the LaserJet 5Si/5SiMx printer trays.
?
&l#H
Feature
Status
Comments
Paper (Media) Source
Modified
Additional parameters have been added to provide
support for Tray 1, the printer's right side multi-purpose
tray and the other optional trays (see the description of
this command in the following paragraphs).
Output Bin
Modified
The Output Bin command (
?
&l#G) selects the
destination bin for the print job.
Alphanumeric ID
New
Specifies alphanumeric String IDs for selecting and
manipulating fonts, macros, and media types. Specifies
media selection by the type of media and supports
enhancements for the printer disk drive.
# =
0
- Print current page (source is unchanged)
1
- Tray 2 (upper drawer)
2
- Manual feed (tray 1, right side tray)
3
- Manual envelope feed (tray 1, right tray)
4
- Tray 3 (lower drawer)
5
- High Capacity Input (HCI), first tray
6
- Optional envelope feeder
7
- Autoselect
8
- Tray 1 (right side tray)
20 - 39
- High Capacity Input (HCI) trays 2- 21
Default
= 7
Range
= 0 to 8, 20 - 39
2-76 Printer-Specific Differences
ENWW
The following table compares the paper/media source values and the
trays they select on various printers.
Value (#)
LaserJet 4,
4 Plus, 4V
LaserJet 4Si,
4SiMx
LaserJet 5Si/
5SiMx
1
PC Tray
Upper
Cassette
Tray 2
(upper drawer)
2, 3
(manual
feed)
MP Tray
Manual Feed
Slot
Tray 1
(right side,
manual feed)
4
MP Tray as
Cassette
Lower
Cassette
Tray 3
(lower drawer)
5
LC Tray
First Tray of HCI
8
N/A
N/A
Tray 1
(right side, normal)
ENWW
Printer-Specific Differences 2-77